The BSSM’s Exhibition of Experimental Mechanics
Wednesday 8th September 2010
Active Learning Laboratory
Department of Engineering
University of Liverpool 

The BSSM’s Exhibition of Experimental Mechanics (EMex) will take place on Wednesday 8th September 2010 as part of the 7th BSSM International Conference on Advances in Experimental Mechanics.

The 2010 BSSM International Conference on Advances in Experimental Mechanics runs from 7th-9th September 2010 and is the seventh in a successful series of conferences. The 2010 conference will offer industry and academia the opportunity to present current developments in experimental mechanics in the exciting new venue of the Department of Engineering, University of Liverpool, UK.

Download an EMex visitor ticket here

Download EMex flyer and registration form

Exhibitors registered to date

Dantec Dynamics
Full field, non-contact, 3D strain and deformation measurement and laser shearography NDT

HBM UK Ltd
Wide range of data acquisition systems and optical measurement systems

Imetrum

LaVision
DIC system supplier

Limess GmbH
Vic3D: Dic System for the measurement of 3D deformation, strain and shape (static, highspeed, vibration, realtime). RTSS: Videoextensometer for tension tests. 3DCAM: Digitization system for shape measureent. Shearography: for NDT (non destructive testing)

Photron Europe
High speed cameras

Vishay
Strain Gauges, instrumentation and load cells.

EMex 10
EMex 10  is the premier UK exhibition for manufacturers and suppliers of strain measurement and stress analysis equipment. The 2010 exhibition will take place  on Wednesday 8th September 2010. The exhibition will be held in the  Active Learning Laboratory.

Exhibition opening times and registration
The exhibition is open from 10:00 to 16:00 on 8th September 2010 and will be advertised widely. Visitors, including over 80 conference delegates, will attend throughout the day. Refreshments for the conference will be served in the exhibition area.

Exhibitors will be invited to present a five minute pitch to conference delegates in a special session dedicated to new products. The session will take place beforre lunch.

To book an exhibition place please contact bianagale@bssm.org Tel: 01525 712779 or Download EMex Flyer and Registration Form

Exhibition Fees
VAT is not applicable

Exhibition (if registered as conference delegate)
BSSM Corporate 1 member Free
BSSM Corporate 2 member £180
Non-member £315

Exhibition only
BSSM Corporate 1 member £225
BSSM Corporate 2 member £350
Non-member £415
Literature stand (non-member) £250
Literature stand (member) £150

Insertion of corporate material into conference delegate packs (exhibitors are limited to one A4 single sheet per insertion)
BSSM Corporate member Free
Non member £55
150 inserts must arrive at the BSSM by August 24th 2010. Please contact bianagale@bssm.org for further details

Social events
Conference Dinner at the Merseyside Maritime Museum on the evening of Wednesday 8 September £57 each
Dinner at a local restaurant on Tuiesday 7 September £30 each

Exhibition Programme
Wednesday 8th September 2010
8:00 Exhibition setup commences
10:00 Exhibition opens
13:00 Buffet lunch served in the exhibition hall
16:00 Exhibition ends
17:30 Stand breakdown completed

Venue information
For further venue information please visit www.liv.ac.uk/engdept

Exhibition publicity
The BSSM is embarking on an extensive marketing campaign to ensure that the exhibition is busy with visitors other than the conference delegates. In addition the exhibition will be publicised in the University, in the Innovation Centre and in Liverpool John Moores University, and so other academics may attend.

Please provide details of your company's activities on the exhibitor booking form so that these can be included in the advance publicity material for the exhibition.

What is provided
Exhibitors will be provided with an exhibition area, one bench (1m x 2mx 980mm high), two chairs and access to power points. The exhibition will be held in the Active Learning Laboratory. Exhibitor displays should not exceed the following dimensions: 2.4m high, 3m wide and 1m deep.

Exhibitors must ensure that any equipment being brought onto the premises has a PAT certificate. Posters should not be fixed to the walls in the exhibition room.

Registration
Registration for exhibitors will take place in the exhibition area during set up times.

Set up and close down times
Exhibitors can set up their stands between 08.00 and 10.00 on the morning of Wednesday 8th September. Stand break down from 16.00 - 17.30 on Wednesday 8th September. Please note there is no facility to set up the day before the exhibition.

Exhibitor loading and access
Please refer to registartion form for full details including a map

Security
Exhibitors are requested to ensure they have adequate insurance cover. Belongings are brought onto the premises at the owner’s own risk. Please note the area in which the exhibition will take place is unsuitable for locking at any time during the day.

Parking
Three visitor car parks with limited spaces are now available on campus off Mount Pleasant and Brownlow Street. Visitors can also use the nearest city council car park, which can be found at the bottom of Mount Pleasant, towards the City Centre. Please refer to registartion form for map location.

Contact details
BSSM Contacts
Biana Gale
bianagale@bssm.org
Tel: +44 (0)1525 712779
John Edwards
johnedwards@bssm.org
Tel: +44 (0)1234 3477

Conference Information
www.bssm.org/conference2010

Conference Social Programme
For further details please visit www.bssm.org/conference2010 or reserve a place by completing the following  EMex Flyer and Registration Form