Queen's University, Belfast
10-12 September 2019
Conference Chair: Professor Adrian Murphy, University of Belfast
The conference programme was packed with important and interesting topics, and in addition we had two invited plenary speakers, the BSSM Measurement Lecture 2019 and the presentation from the winners of the Fylde Prize (BSSM best paper in ‘Strain’ 2018). The quality of work presented and the standing of speakers was second to none and we had a very stimulating three days. We were also delighted to host the annual BSSM EMex Exhibition of Experimental Mechanics and the BSSM’s Young Stress Analyst Competition.
The conference had special sessions in Experimental Biomechanics, Fatigue and fracture of components and joints, In-situ and micro-mechanical testing, Large deformations in polymers and composites, Novel and advanced techniques for characterisation and testing, Structural Health Monitoring, Supporting Simulations with Strain Measurement (CEN WS71), and Volumetric imaging techniques for structural characterisation. Copies of the abstracts and presentations are available below.
"Ground Vibration Testing at NASA Armstrong, Emphasizing on Passive Aeroelastic Tailored Wing Ground Vibration Test using Fixed Base Correction Method"
Natalie Spivey, NASA Armstrong Flight Research Center
Natalie Spivey is an Aerospace Engineer at NASA Armstrong Flight Research Center in Southern California. She works in the Structural Dynamics Group within the Aerostructures Branch and has been involved in aircraft structural dynamics airworthiness, modal testing and flight flutter testing for twenty years. She obtained her BS degree in Aerospace Engineering from Iowa State University (ISU) in 2000 and received her MS degree in Mechanical Engineering from University of California, Los Angeles (UCLA) in 2006. She has supported numerous flight research programs as either a structural dynamics engineer or lead for programs such as the X-53 Active Aeroelastic Wing, Boeing’s Unmanned Combat Air Vehicle, X-43 Hyper-X, F-15B Quiet Spike, X-48 Blended Wing Body, Global Hawk, DC-8, SOFIA, X-56 Multi-Use Technology Testbed, various F-15 and G-III flight experiments, Passive Aeroelastic Tailored Wing, and currently working on X-57 Maxwell and X-59 Low Boom Flight Demonstrator.
With her role as a technical lead on many of those projects she is highly sought after from NASA projects due to her wide range of hands-on modal testing, airworthiness clearance and flight testing control room experience. Natalie has been a recipient of numerous NASA project awards and currently serves as a member of the NASA Engineering Safety Center (NESC) Loads & Dynamics Technical Discipline Team.
"Strain rate dependency of materials: characterisation and identification of models parameters. From standard procedure to advanced inverse methods based on full field measurements"
Bertrand Langrand, ONERA
Bertrand Langrand is a Research Director at ONERA, The French National Aerospace Research Centre, in Structural and Solid Mechanics. He works in the Dynamic Resistance Group within the Materials and Structures Department. He serves also as Scientific Deputy Director. He obtained his PhD degree in Solid Mechanics and Mechanical Engineering in 1998 and his Habilitation degree in 2011.
Bertrand has more than 20 years of experience in crashworthiness, impact and blast-loaded structure problems. He has been involved in many research programs with different technology readiness levels for the aerospace industry or aviation authorities. Main achievements include the development of advanced numerical and experimental methods. His research focuses on material behaviour characterization, parameter identification, assembly modeling and Fluid/Structure interaction.
BSSM Measurement Lecture
"Challenges and opportunities in high rate characterisation of soft material"
Professor Clive Siviour, University of Oxford
Clive Siviour is a Professor of Engineering Science at the University of Oxford, where he performs research and teaching in Mechanical Engineering. He completed his undergraduate degree in Physics in 2001 and his PhD, High strain rate properties of materials using Hopkinson bar techniques, in 2005, both from the University of Cambridge. In 2005, he moved to the University of Oxford, where he took up a permanent position in 2008.
His main research interests are in characterisation of materials under dynamic loading, in particular the development and application of experimental procedures to elucidate and understand strain rate dependence. He has worked on a wide range of materials, including metal alloys for aerospace applications (e.g. titanium, nickel alloys), foams and composites, and has a long-standing interest in high speed imaging.
A major area of research has been on impact response of polymers, in particular the use of time-temperature superposition to validate and replicate properties under high rate deformation. He also has an interest in deriving and interpreting quantitative measurements of material response from measurements of wave propagation, particularly for low modulus materials.